Sample Dspx session
You can use the commands in the following sample session to manually request the internal processor parameters, and display them in numerical format.
For more information, see RVP10 User Guide (M212604EN).
$ dspx -nochat
Digital Signal Processor Examiner (DSP#1)
[110] : w 9
1 Words were written.
[111] : r
64 Words were received.
[110] : d
0000/ 0: e000 0096 07d1 e13e -8192 150 2001 -7874
0004/ 4: 00b6 0780 0514 0000 182 1920 1300 0
0008/ 8: 0000 0280 0000 0000 0 640 0 0
000c/ 12: 002d a7d6 001e 0096 45 -22570 30 150
0010/ 16: 0096 0000 00fa 7530 150 0 250 30000
0014/ 20: 07d0 1770 2ee0 5dc0 2000 6000 12000 24000
0018/ 24: 842b 0000 2710 2710 -31701 0 10000 10000
001c/ 28: 07d0 07d0 0017 0666 2000 2000 23 1638
0020/ 32: 000d fedf 0066 0050 13 -289 102 80
0024/ 36: fd89 0005 001e 0000 -631 5 30 0
0028/ 40: 0000 0000 0000 b3f6 0 0 0 -19466
002c/ 44: 0033 007a 0000 0780 51 122 0 1920
0030/ 48: 8000 0000 0000 0000 -32768 0 0 0
0034/ 52: 0000 0000 0000 0000 0 0 0 0
0038/ 56: 0000 0000 0000 0000 0 0 0 0
003c/ 60: 0000 0000 0000 0000 0 0 0 0You can also view the corresponding results of a gparm command:
[110] : gparm
==================== GPARM Read Back ====================
Code Revision 14 Serial #: None
L-Status: 0x0000 I-Status: 0x0280 Diagnostics: 0x0000 0x0000
Current A/D Samples: I:5 Q:0 LOG:30
Requested Trigger: 600.00Hz Trig-Out: 600.00Hz Trig-In: 599.40Hz
Last PROC Starting and Ending rates: 600.00Hz, 600.00Hz
Maximum Trigger Rates: 3000.00Hz, 1000.00Hz, 500.00Hz, 250.00Hz
Trigger Count: 2014614 Wave: 0 PW: 0 PW-patterns: 0x842b
Bins in Range Mask: 150 Range Averaging: 1
Last AQ Bin Count: 150 Last Valid Bin Count: 150
AZ Tags: 0x6539 (142.34) EL Tags: 0x00b6 (1.00)
Noise Range: 250km Noise PRF: 200.00Hz
LOG Noise: 30.00 LENM: 30.00 LENSD: -512.00
I-Mean: 5.08 I-STD: 0.25 Q-Mean: 0.00 Q-STD: 0.03
SOPRM Flags: 0x0017
Thresholds: LOG: 0.81dB WSP: 5.00dB SQI: 0.40 CCOR: -18.06dB
LOG Slope: 0.400 Cal Refl: -39.44dBZ Sample Size: 45