Inputs and outputs

Inputs and outputs
Feature Description
Antenna drive output ±/- 10V to servo amplifiers
A/D Inputs 12 A/D inputs nominal ±6V, 12 bits @ 100 Hz
Control BitOutput Range TTL
Tachometer inputs Analog up to ±80 V
AZ and EL Angle Inputs
TTL Up to 16-bit binary and BCD
Synchro/Resolver Various frequencies supported
AZ and EL Angle Outputs
Parallel TTL Binary angle up to 16 bits
Asynchronised Serial RS232
Host Interface
Ethernet 10/100/1000T
Asynchronised serial selectable up to 39 Kbps RS232C
Status Bit Input Range
Standard ±27 V triggering at +2.5V
Switch Closure configurable pull-up/down +5V, 0V
Wide range ± /- 27V, 330K impedance
Logic threshold +2.5V