Configuring Application Tools

The IRIS Tools menu shows the available tools for the site: the top pane shows active tools for the site, the bottom pane shows inactive tools.

Figure 1. IRISnet Tools Menu
  1. Select Tools > Config.

    The IRIS Tools menu appears.

  2. To access an inactive tool, select it.

    The tool moves up to the active tools pane.

  3. To de-select a tool, select it.

    The tool moves down to the inactive tool pane.

  4. To save you changes, select Exit Config.
  5. To close the configuration view without saving your changes, select Cancel.