IFDR10 hardware

Figure 1. IFDR10

The IFDR10 hardware consists of a printed circuit card assembly contained in a mechanical housing. The tight metal housing gives the device the maximum noise immunity. The housing protects the PCB, a heat sink, and an EMI/RFI barrier. The mounting options are designed to be backwards compatible with RVP901 IFDR. IFDR10 may be mounted flat or upright on either of its side.

The dimensions of the module are 246 mm × 136 mm × 52.5 mm (10.6 in × 5.6 in × 2.0 in)

Figure 2. IFDR10 components