Setting up real-time correction in RVP10

This corrects the original Z and ZDR moments. To activate the feature, make sure that:

  1. The signal processor is licensed for dual-polarization.
  2. The signal processor fundamental operating mode in dspx settings is configured for dual-polarization.
    Fundamental RVP10 operating mode: 3
    # BW DynR Filt Pol IFD Description
    0 Full Norm Norm 1 1 Standard single channel
    2 Full Norm Norm 2 2 Dual Pol on separate IFDs
    3 Half Norm Norm 2 1 Dual Pol on single IFD
    4 Half Wide Norm 1 1 Extra wide dynamic range
    5 Half Norm Long 1 1 Extra long/fast FIR filters
  3. The dual polarization attenuation filter is enabled using the selection in the mp TTY setups: 
    Polarimetric Attenuation Correction:"USER" or "ALWAYS"