RVP10 receiver modes

Use the Mc menu to select the receiver configuration that defines IF processing for your site.

# Rx Mode Description
– –––––––––––––––––––––––
0 Standard single channel
1 ––Reserved––
2 --Reserved--
3 Standard dual channel

Receiver mode configuration options
Mode	Description
Mode-0: Standard single channel	This is the most common mode used by single-polarization CW-pulsed radars whose front-end LNA has a dynamic range less than ≤95 dB. The (I,Q) data are computed from IF samples.
Mode-1: Reserved	Reserved for future development.
Mode-2: Reserved	Reserved for future development.
Mode-3: Dual-Rx from two IF inputs	Standard dual polarization mode. The `H` and `V` channels are fed to 2 separate IF inputs using the same intermediate frequency.