RVP10 socket interface

RVP10SRV is configured to listen on a network port. It is ready to interface to a host computer through the network using the DspExport program. When the IRIS Radar software is installed on the same RVP10SRV computer, it is pre-configured to communicate with RVP10SRV processes through the native interface, bypassing the socket interface.

RVP10SRV includes built-in utilities such as Setup, dspx, and Ascope. See IRIS and RDA Utilities Guide (M211316EN).

Because RVP10SRV can only have one program controlling it at a time, using a local program such as dspx blocks network access.