Installing the RVP10SRV server computer

warningWarning

The RVP10SRV server computer has two power supplies.

Disconnect power from both power supplies when powering down or servicing the unit.

  1. Mount the RVP10SRV server chassis in an equipment rack on rack slides.
  2. Use the fiber optic cable to connect IFDR10 to the RVP10SRV server chassis.
    Clean the connectors carefully with appropriate tools. If the connectors are not properly cleaned, the data quality may suffer.
  3. Connect the power cables.

    The device includes dual-redundant power supplies, with two line cords.