Powering up RVP10SRV

  1. Power-up and boot IFDR10.

    If IFDR10 is not powered-up and booted, the rvp10 process cannot start on RVP10SRV.

  2. Start or reset RVP10SRV.
    The host Linux PC goes through an automated boot process that ultimately starts the RVP10 application.
  3. While RVP10SRV runs extensive internal diagnostics, if no display is connected yet, you can connect a display to view any error messages or monitor the startup log in /var/log/irisrda/rvp10.log.