Jump to main content
RCP8 User Guide Radar Control Processor
RCP8 User Guide Radar Control Processor
  1. Home
  2. Operating Dual Systems
  3. Configuring IRIS for Dual-System Support
  • About This Document
  • Product Overview
  • Functional Description
  • Servo Operation Theory
  • Hardware Installation
  • Antenna Alignment
  • TTY Menu Control and Monitoring
  • TTY Setup Menus
  • Technical Data
  • Communication Formats
  • I/O-62 connector panel pin properties
  • Operating Dual Systems
    • Dual System Applications
    • Dual System Architecture
    • Dual System Cabling and Modifications
    • RCP TTY Site Settings for Dual System
    • RVP TTY Setups for dual-system support
    • Configuring IRIS for Dual-System Support
      • IRIS Radar Status Menu Mode Configuration
      • IRIS Setup Utility Mode Configuration
      • Configuring IRIS Status Products for Dual Systems
      • BITEX Setup
    • Configuring Dual Frequency Systems
    • IRIS Dual System Switching Menu
    • Troubleshooting Dual Systems
  • Technical support
  • Warranty and product returns
  • Recycling

Configuring IRIS for Dual-System Support

You must configure IRIS to support dual systems.

  1. Separately configure systems A and B so they can function independently:
    1. IRIS Radar Status Menu Mode Configuration
    2. IRIS Setup Utility Mode Configuration
    3. Configuring IRIS Status Products for Dual Systems
    4. BITEX Setup
  2. Test dual‑system operation
  • IRIS Radar Status Menu Mode Configuration
  • IRIS Setup Utility Mode Configuration
  • Configuring IRIS Status Products for Dual Systems
  • BITEX Setup
Vaisala