Set AFC level (SETAFC)

SETAFC sets the AFC level to a given value.

The signed 16-bit span is identical to GPARM Output #51 which shows the present AFC level, that is, corresponding to the -100 ...  +100% AFC range that is defined in the Mb menu. See Mb — Burst pulse and AFC.

RVP10 automatically converts the new level to the configured analog or digital AFC output format. The exception is for the Motor/Integrator type of AFC loop, for which this command does nothing.

 15  14  13  12  11  10   9   8   7   6   5   4   3   2   1   0
 ---------------------------------------------------------------
|   |   |   |   |   |   |   |   |    |   |   |   |   |   |   |   |
|               | 0   0   0   0    1   0   1   1   1   1   1   1 |  Command 
|---------------|------------------------------------------------|  

 15  14  13  12  11  10   9   8   7   6   5   4   3   2   1   0
 ---------------------------------------------------------------
|   |   |   |   |   |   |   |   |    |   |   |   |   |   |   |   |
|      16–Bit AFC/MFC Value (–32768 through +32767)              |  Input 1 
|-------------------|--------------------------------------------|