Installing and configuring TS recording

You can use TS recording in two configurations. The simplest (but least flexible) configuration is where RVP10 also serves as the archive host.

When using RVP10 as the archive host, create a separate partition for the purpose to prevent system crashes.

The ideal configuration is with a separate archive host with an increased amount of disk space and peripherals (that is, tape drives). The two system configuration should be used in a high bandwidth environment. If this is not possible, RVP10 can be equipped with a separate disk for archive operations.

In two system configurations, the tsimport and tsexport modules must be turned on at boot time on both systems. The UDP ports for the sending and receiving system must also be configured.