Starting Integrator Utility

Manual Integrator Start-up

To start the TDWR/LLWAS Integrator you must be an IRIS Operator. In a terminal window on the workstation where the Integrator is run (typically an RPG IRIS/Analysis system) type:

$ tdwr_llwas_int

This starts the software and log events in the terminal window. Iconify the terminal so that you can read any messages in the log.

Automatic Integrator Startup

The recommended approach is to start the integrator automatically when the workstation boots-up. This is done by creating a startup file in a manner identical to the automatic siris startup.