Archive on local RVP10

Utility settings

The support menus settings for archiving on a local RVP are:

• TS Switch: Local Archive
• TS Archive: Play

Network note

In most cases, you are not sitting up at the radar, so you need to export the displays for these utilities over the network by doing one of the following:

• Easy way: Use sigterm <hostname> to open a terminal window.

• Manually: rlogin and export the display with DISPLAY=<hostname>:0.0.

  You may also need to type xhost + on your local workstation.

It is often convenient to get the playback going in tsarchive with Repeat set, then start Ascope.

Ascope starts in the playback mode and updates the display appropriately. You are free to select the data processing and display parameters "on-the-fly" as playback is continuing and repeating.

When Ascope is set the way that you want it, you can use the TS Archive menu to select files or restart the playback.