Ascope Test

Test Goal

Verify that the Ascope utility functions properly.

Background

The Ascope utility provides independent radar control and plotting for testing the radar and RVP10.

Test Equipment

KVM connected

Test Procedure

  1. Enter the TTY setups through dspx.
  2. Issue the ascope command.
  3. Verify that the Ascope utility launches and that the data display begins updating.
  4. Configure a DEFAULT startup and save it.
  5. Exit and restart Ascope.
  6. Verify that the default startup is properly restored.

Checklist

Ascope Setup Checklist
Task Checked OK/Not OK Remarks
Test procedure completed successfully.

Parameters are set.

See TTY nonvolatile setups in IRIS and RDA Utilities Guide (M211316EN).
Test Passed
For Customer Date:
For Vaisala Date: