Checking Board Configuration with Setup Mc Command
Test Goal
Verify that the TTY setups for the Board Configuration section are properly configured for the customer application.
Test Equipment
KVM installed
Test Procedure
- Enter the TTY setups through
dspx. - Issue the Mc command to display the internal status.
- Set all the values, as required, for your operation.
Checklist
| Task | Checked OK/Not OK | Remarks |
|---|---|---|
| Test procedure completed successfully. | ||
|
Status information is correct and shows no faults. |
||
| Parameters have been set. | ||
| Test Passed | ||
| For Customer | Date: | |
| For Vaisala | Date: | |