Checking Transmitter Phase Control with Setup Mz Command
Test Goal
Verify that the TTY setups for the Transmitter Phase Control section are properly configured for the customer application.
 | This feature is not used for magnetron systems since these have inherent random phase that is measured, but not controlled. |
Test Equipment
KVM connected
Test Procedure
- Enter the TTY setups through
dspx. - Issue the Mz command.
Checklist
| Task | Checked OK/Not OK | Remarks |
|---|---|---|
| Test procedure completed successfully. | ||
|
Parameters are set. |
||
| Test Passed | ||
| For Customer | Date: | |
| For Vaisala | Date: | |