Installation Check
Test Goal
Verify that the RVP10 is properly connected to the radar system and document some basic radar characteristics. There are differences for TWT/Klystron and magnetron radar systems.
Checklist
 | Record all values when instructed. Save the values for future reference. |
| Task | Checked OK/Not OK | Remarks |
|---|---|---|
| IFDR10 Digital Receiver is properly connected to AC/DC line voltage according to supplied power converter. | ||
| IFDR10 is mounted in the radar receiver cabinet or other convenient location. | ||
|
IFDR10 IF input connection. IF Frequency (MHz): ___________. |
||
RVP10SRV Signal Processor chassis installed in (circle one):
|
||
|
Distance between IFDR10 and RVP10SRV chassis: ___________________ |
||
CAT5E Ethernet cable is connected to J2 Ethernet of IFDR10 and
the other end is connected to ETH1 port of the RVP10SRV Server
chassis. |
||
| Trigger connections verified | ||
| Magnetron Systems | ||
IF burst pulse is connected to J13 ADC–E of
RVP901. |
||
| Test Passed | ||
| For Customer | Date: | |
| For Vaisala | Date: | |